This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 3 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OS images to download
#51
Hi DVE

actually, add_event_callback.py control GPIO through /sys/kernel/debug/gpio/export and unexport
but, the permission as below:
linaro@tinkerboard:/sys/kernel$ ls -al | grep debug
drwx------ 29 root root 0 Jan 1 1970 debug

so, you can root to use it or change permission for user linaro.

Reply
#52
Hi. This code works nice in Tinker OS, but does not work in pure Armbian_5.41_Tinkerboard_Debian_stretch_default_4.4.119.

I used sudo, sure, but it didn't help. This problem was also discussed in armbian forum, as I see the fix is not in a final release yet: https://forum.armbian.com/topic/4792-tin...io/?page=2 And I'm not sure yet, if TinkerOS python library is compatible with Armbian, btw.
Reply
#53
ELAR Systems have updated their Ubuntu image to the latest 18.04 LTS:

https://www.elar-systems.com/website/ind...?Itemid=-1
Reply
#54
Armbian Bionic with 4.4.129 or 4.14.37
https://dl.armbian.com/tinkerboard/night...desktop.7z
Armbian. Lightweight Debian Stretch or Ubuntu Bionic for Tinker Board.
Reply
#55
(04-29-2018, 11:40 AM)Mikerr Wrote: ELAR Systems have updated their Ubuntu image to the latest 18.04 LTS:

https://www.elar-systems.com/website/ind...?Itemid=-1

thanks again Mikerr,  my 1st sbc running 18.04  , runs good so far
Reply
#56
I am still unable to see my SD card full capacity, only about 5.2 GB. SAM´s instructions were way above my IT capacity. Could anyone explain in a simple, step by step, user friendly, non-developer language how to expand the file system or otherwise get access to the 128 GB SD card full capacity? Cheers! 

(03-19-2018, 03:45 AM)shaba Wrote:
(03-13-2018, 09:51 AM)Mikerr Wrote: Updated with latest android image link, and added play store version

I have installed the 20180206-tinker-board-android-marshmallow-play-v13.13.0.74.img file from your google drive. Works great! However the 128 Gb microSD card is only recognized by the board as having  5.2 Gb free space. I have formatted the card again with SD Card Formatter (overwrite format) checked the card and it´s OK. Wrote your img file with Etcher and it only seas 5.2 Gb free space again. Pls advise.
Reply
#57
why my tinkerboards installed ubuntu or lubuntu is fail?
Is it not supported yet?
Reply
#58
Finally I have found the answer to the SD card size issue when installing Miker´s Android with PlayStore pre installed. One has to perform a factory reset from the Android Settings /Backup&Reset. Wait 5 min to reboot and once it´s ready update Google Play Services.


For more details see this thread: 
https://tinkerboarding.co.uk/forum/threa...age-2.html 

(05-09-2018, 02:44 AM)shaba Wrote: I am still unable to see my SD card full capacity, only about 5.2 GB. SAM´s instructions were way above my IT capacity. Could anyone explain in a simple, step by step, user friendly, non-developer language how to expand the file system or otherwise get access to the 128 GB SD card full capacity? Cheers! 

(03-19-2018, 03:45 AM)shaba Wrote:
(03-13-2018, 09:51 AM)Mikerr Wrote: Updated with latest android image link, and added play store version

I have installed the 20180206-tinker-board-android-marshmallow-play-v13.13.0.74.img file from your google drive. Works great! However the 128 Gb microSD card is only recognized by the board as having  5.2 Gb free space. I have formatted the card again with SD Card Formatter (overwrite format) checked the card and it´s OK. Wrote your img file with Etcher and it only seas 5.2 Gb free space again. Pls advise.
Reply
#59
FlintOS mimics the Chromebook UI experience however when trying to manage with G Suite for Education we get the message "Oops! The system failed to determine device model or serial number".  Is there a configuration edit we can do or does anyone know if FlintOS is incompatible with Google for Education?


Attached Files Thumbnail(s)
   
Reply
#60
This might help:
https://github.com/flintinnovations/over...i/issues/1
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)