This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Picamera Tinker board
#1
Hi friends,
I m new to tinker board. Can i use picamera with tinker board csi port. Can we access the picamera with same commands as in RPI for picamera controls.
 Can anyone pls help me?
Thanks in Advance
Reply
#2
I've personally not had success yet but only have the old original pi camera 1.3 OV5647

With tinkerOS 2.01 pi camera V2 (IM219) should come up as /dev/video0 - so most standard linux software will work

See these threads :

https://tinkerboarding.co.uk/forum/threa...-2031.html
Reply
#3
I am just finishing the installation of 3 picams on tinkerboards streaming video over a network using mjpg-streamer. In my case, this application works well with both the v2.1 'regular' and the v2.1 pinoir camera boards. However, I dunno how extensive existing camera controls are. I've so far only changed the resolution in mjpg-streamer (which works fine). I am guessing that the controls for streaming with mjpg-streamer are relatively limited compared to what you can do when you take snapshots or record video with a picam on the RPI. I haven't had the need to look for more controls yet but my uneducated guess is the tinkerboard drivers are not fully developed yet and so far only provide basic functionality,
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)