This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RPi RTC and Tinkerboard
#1
Question 
My friend who has Raspberry Pi is upgrading to another SBC, and he gave me an unbranded RTC module as it won't work with his new SBC.
I looked for it online, and found out that he propably got it from here (it's a czech eshop).
Can I follow RPi based tutorial on how to connect it, or are there any special rituals required to use this with TB?
EDIT: the description says that it works with Raspberry Pi and Arduino
Reply
#2
(09-03-2017, 04:13 PM)Derek Wrote: My friend who has Raspberry Pi is upgrading to another SBC, and he gave me an unbranded RTC module as it won't work with his new SBC.
I looked for it online, and found out that he propably got it from here (it's a czech eshop).
Can I follow RPi based tutorial on how to connect it, or are there any special rituals required to use this with TB?
EDIT: the description says that it works with Raspberry Pi and Arduino

Hi Derek,

I use DS3231 RTC module on Tinker Board, and wrote this article -- http://qiita.com/mt08/items/721182dddd9cd77534ec .
It needs ::

 - rtc-ds1307.ko : Build kernel module
 - rk3288-miniarm.dts : Modify .dts and build
 - Edit 4 files  
    - /etc/default/hwclock   (rtc1)
    - /lib/udev/rules.d/85-hwclock.rules (rtc0 => rtc1)
    - /lib/udev/rules.d/50-udev-default.rules (rtc0 => rtc1 )
    - /lib/udev/hwclock-set (Comment out a few lines)


I'm not sure if DS1302 is working with rtc-ds1307.ko module, but you may try my binaries.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)