This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Camera testing
#1
I have started to try some camera testing. I am using a CSI IP camera and the Auvidea CSI B101 Rev 4 board.

I followed the CSI_DSI_Configuration documents which are available on the Asus UK website.

Here is what I found so far, I do not seem to be able to access /dev/video0. 
On Pi3 I was able to just run raspivid or we did this with sudo modprobe bcm2835-v4l2

Here is the ssh terminal output:

root@linaro-alip:/home/linaro/camera# sh  /home/linaro/camera/copy_xml_file.sh
root@linaro-alip:/home/linaro/camera# dumpsys
CAMHALInfo:   dumpsys start !

CAMHALInfo:   construct ISP dev........
CAMHALInfo:   CAMHALVERSION is: 1.a.0

CAMHALInfo:   getCamHwItf:1058
CAMHALInfo:   init ISP dev......
CAMHALError:  ERR(initHw):Cannot open /dev/video0 (error : No such file or directory)

CAMHALError:  isp dev init error !

CAMHALInfo:   open xml file(/tmp/capcmd.xml) success

CAMHALInfo:   parser:resolution(1920x1080)
CAMHALInfo:   parser:resolution(3280x2464)
CAMHALInfo:   parser:resolution(1920x1080)
CAMHALInfo:   parser:resolution(3280x2464)
CAMHALInfo:   createInstance:delete this 2 cap task from queue!
CAMHALInfo:   createInstance:delete this 1 cap task from queue!
CAMHALInfo:   createInstance:delete this 0 cap task from queue!
CAMHALInfo:   createInstance:task count is 1 

CAMHALWarn:   WARNING: will ignore the request fmt,do nothing!
CAMHALInfo:   press any key to stop tuning:
Segmentation fault
Reply
#2
(03-31-2017, 12:45 AM)hblanken Wrote: I have started to try some camera testing. I am using a CSI IP camera and the Auvidea CSI B101 Rev 4 board.

I followed the CSI_DSI_Configuration documents which are available on the Asus UK website.

Here is what I found so far, I do not seem to be able to access /dev/video0. 
On Pi3 I was able to just run raspivid or we did this with sudo modprobe bcm2835-v4l2

Here is the ssh terminal output:

root@linaro-alip:/home/linaro/camera# sh  /home/linaro/camera/copy_xml_file.sh
root@linaro-alip:/home/linaro/camera# dumpsys
CAMHALInfo:   dumpsys start !

CAMHALInfo:   construct ISP dev........
CAMHALInfo:   CAMHALVERSION is: 1.a.0

CAMHALInfo:   getCamHwItf:1058
CAMHALInfo:   init ISP dev......
CAMHALError:  ERR(initHw):Cannot open /dev/video0 (error : No such file or directory)

CAMHALError:  isp dev init error !

CAMHALInfo:   open xml file(/tmp/capcmd.xml) success

CAMHALInfo:   parser:resolution(1920x1080)
CAMHALInfo:   parser:resolution(3280x2464)
CAMHALInfo:   parser:resolution(1920x1080)
CAMHALInfo:   parser:resolution(3280x2464)
CAMHALInfo:   createInstance:delete this 2 cap task from queue!
CAMHALInfo:   createInstance:delete this 1 cap task from queue!
CAMHALInfo:   createInstance:delete this 0 cap task from queue!
CAMHALInfo:   createInstance:task count is 1 

CAMHALWarn:   WARNING: will ignore the request fmt,do nothing!
CAMHALInfo:   press any key to stop tuning:
Segmentation fault

The Rockchip developers said that raspberry pi's version 2 camera 'may' work. 
https://github.com/rockchip-linux/meta-r...p/issues/6 

I will be trying out the camera integration sometime next week but unfortunately there is no official app to test except an linux ported android app as the dev says. Will share my findings
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)