This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flip the screen bug
#1
i have a Tinker board S with a
Raspberry Pi 7" Touch Screen LCD in a
Raspberry Pi Touchscreen Case
I have installed android Version 14.4.0.5

i need to flip the screen 180 because of how the case is designed

when i go to setting/display/HDMI/HDMI rotation/ 180
the screen dose the flip animation and doesn't flip but the touch screen flip and it make it very hard to undo.

any idea on how to flip the screen
the screen is connected to the MIPI DSI connector
and pins 3-6 on the gpio

I tried the build prop method last year with a older android version and had the same affects.
Reply
#2
Hi warwolfx0,

Since you are using android..
have you tried to install Apps like..
Rotation Control... APK here...
https://play.google.com/store/apps/detai...l&hl=en_GB


I have one tinker board with Raspberry Pi 7" Touch Screen LCD in a
SmartiPi Touch Case for the Official Raspberry Pi Display (LEGO)
android TinkerOS_Android V13.14.0.95
& Im using.. Rotation Locker.. APK here..
I can not find link to it on play store anymore ;-[[[...

----------------
Hope it helps,
k,
Reply
#3
yup i have tried that same app and have the same issues.
Reply
#4
i figured it out
so it turns out i was missing a command in the
build.prop
this is stock
ro.sf.hwrotation=0
sys.hwc.device.primary=HDMI-A
sys.hwc.device.extend=DSI

i was just doing the ro.sf.hwrotation
once i did the device.primary to DSI the screen works.


ro.sf.hwrotation=180
sys.hwc.device.primary=DSI
sys.hwc.device.extend=HDMI-A

also the app works now.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)