This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Official RPI 7 inch touchscreen and TinkerOS Android
Has anyone been able to get touch working on the Official Raspberry Pi 7" Touchscreen on Tinker OS Android? I know folks were able to get it working on Linux, but when I finally got around to setting up my Tinker Board this past weekend with the latest TinkerOS Android version, I noticed that it wasn't responding to any touches from the touchscreen. I followed the original RPI GPIO pinouts (5v power + Ground to pins 2 and 6 respectively, as well as pins 3 and 5 for SCA and SCL respectively) to see if that made it work, but with no success. Hopefully I'm not the only one going through this issue.
I couldn't get my screen to work with android at all so haven't tested any further.

This screen did work fine with Debian though.

Forum Jump:

Users browsing this thread: 1 Guest(s)