This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installing on/off switch Problem?
Hello everyone,,
I did a bit of searching around really couldnt find a good tutorial on how to properly install an on/off switch on the TB. I currently use mine as a desktop and I'd mobdro lucky patcher kodi rather not  (if I can avoid it) have to constantly plug and unplug the USB power in order to start it up after I gracefully shut the OS down. Hell, I'd be happy with just an on switch that I could solder/pin into the GPIO to just gracefully turn the TB on.
The ASUS power supply unit comes with a switch on the cord. This is better than unplug the micro USB. The same might be applied to the GPIO pins, so the 5V can be cut off and power down the system.
For S version there are pins near the micro USB that perform a shut down when shorted.
Light blue words might be a link. Have you try to click on them? Big Grin

Forum Jump:

Users browsing this thread: 1 Guest(s)