This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tinker Board S - eMMC recovery??
Tinker Board S ...... eMMC recovery ...... how?  

Seems I may have been (am) a muppet and may have wiped the eMMC card using the SD Formatter.... then imaged Armbian onto the eMMC and it's not booting.....


{not tried to reimage TinkerOS back to the eMMC yet}
...working my way through the 1000+ ways things don't work to find the one that does...
A translated page, but should help:
Thanks Mike

Think this page has helped (waiting for emmc flash to finish)

>> EDIT >>
Yes I can confirm that if you image TinkerOS to an SD card and then insert it and used the eMMC recovery mode to boot the SD card whilst plugged in to the PC USB port you can then use the eMMC port to write images directly to it again after restoring UMS to the uboot process.
...working my way through the 1000+ ways things don't work to find the one that does...
[-] The following 1 user Likes Robertspark's post:
  • Klaatu
I had the exact same terror due to my inexperience. After following all of this I was able to return to happy board again. Thanks for the advice sharing guys.
Additional informations here
Light blue words might be a link. Have you try to click on them? Big Grin

Forum Jump:

Users browsing this thread: 1 Guest(s)